Due to the protracted health emergency related to Covid-19, which prompted the Italian Government to order the closure of industrial activities not linked to essential activities, we are sorry to inform that the course on "Industrial vacuum and Leaking" scheduled for days 16 and 17 April 2020 was canceled.
On the other hand, the dates of 18 and 19 June 2020 remain valid, except for new provisions.
We thank you for your understanding in this difficult moment.
Location: Centro di Formazione della Lazzero Tecnologie Srl, Chieri (TO), Italia
Dates: 20 - 21 February 2020, 16 - 17 April 2020, 18 - 19 June 2020, 17 - 18 September 2020, 19 - 20 November 2020.
DESCRIPTION
The introductory course is intended for those who approach vacuum and its most typical industrial applications, from simply pressure reduction to the depending effects such as degassing and dehydration or analysis of the partial pressures, to finish with the leak detection systems by mean of mass spectrometry.
Particular attention is therefore paid to the leaktest systems with tracing gas .
WHO IS IT FOR
• Process technologists,
• Product Industrialization managers,
• Operators and managers of Quality Control,
• Conductors of testing machines or devices,
• Maintenance technicians.
The course is aimed at those who approach new technologies, as well as those who already own process or testing equipments, or operate within technological contexts and wants to examine the issue in a practical and thorough way.
The course is given by experts in vacuum, certified in Non-Destructive Testing ( NDT) according to UNI-EN 473-2001
![]() |
Friendship over the partnership. The meeting from Zaverio Lazzero with the fair partner Steve Niu and Eng. Mu, former LT collaborator and now engaged in the park for the development of new technologies in Shanghai. |
Location: Centro di Formazione della Lazzero Tecnologie Srl, Chieri (TO), Italia
Dates: 21 - 22 February 2019, 11 - 12 April 2019, 13 - 14 June 2019, 19 - 20 September 2019, 14 - 15 November 2019.
DESCRIPTION
The introductory course is intended for those who approach vacuum and its most typical industrial applications, from simply pressure reduction to the depending effects such as degassing and dehydration or analysis of the partial pressures, to finish with the leak detection systems by mean of mass spectrometry.
Particular attention is therefore paid to the leaktest systems with tracing gas .
WHO IS IT FOR
• Process technologists,
• Product Industrialization managers,
• Operators and managers of Quality Control,
• Conductors of testing machines or devices,
• Maintenance technicians.
The course is aimed at those who approach new technologies, as well as those who already own process or testing equipments, or operate within technological contexts and wants to examine the issue in a practical and thorough way.
The course is given by experts in vacuum, certified in Non-Destructive Testing ( NDT) according to UNI-EN 473-2001
Location: Centro di Formazione della Lazzero Tecnologie Srl, Chieri (TO), Italia
Dates: 22 - 23 February 2018, 12 - 13 April 2018, 14 - 15 June 2018, 20 - 21 September 2018, 15 - 16 November 2018.
DESCRIPTION
The introductory course is intended for those who approach vacuum and its most typical industrial applications, from simply pressure reduction to the depending effects such as degassing and dehydration or analysis of the partial pressures, to finish with the leak detection systems by mean of mass spectrometry.
Particular attention is therefore paid to the leaktest systems with tracing gas .
WHO IS IT FOR
• Process technologists,
• Product Industrialization managers,
• Operators and managers of Quality Control,
• Conductors of testing machines or devices,
• Maintenance technicians.
The course is aimed at those who approach new technologies, as well as those who already own process or testing equipments, or operate within technological contexts and wants to examine the issue in a practical and thorough way.
The course is given by experts in vacuum, certified in Non-Destructive Testing ( NDT) according to UNI-EN 473-2001
Location: Centro di Formazione della Lazzero Tecnologie Srl, Chieri (TO), Italia
Dates: 23 - 24 February 2017, 5 - 6 April 2017, 15 - 16 June 2017, 28 - 29 September 2017, 9 - 10 November 2017.
DESCRIPTION
The introductory course is intended for those who approach vacuum and its most typical industrial applications, from simply pressure reduction to the depending effects such as degassing and dehydration or analysis of the partial pressures, to finish with the leak detection systems by mean of mass spectrometry.
Particular attention is therefore paid to the leaktest systems with tracing gas .
WHO IS IT FOR
• Process technologists,
• Product Industrialization managers,
• Operators and managers of Quality Control,
• Conductors of testing machines or devices,
• Maintenance technicians.
The course is aimed at those who approach new technologies, as well as those who already own process or testing equipments, or operate within technological contexts and wants to examine the issue in a practical and thorough way.
The course is given by experts in vacuum, certified in Non-Destructive Testing ( NDT) according to UNI-EN 473-2001
Location: Centro di Formazione della Lazzero Tecnologie Srl, Chieri (TO), Italia
Dates: 25 - 26 February 2016, 14 - 15 April 2016, 16 - 17 June 2016, 15 - 16 September 2016, 20 - 21 October 2016, 17 - 18 November 2016.
DESCRIPTION
The introductory course is intended for those who approach vacuum and its most typical industrial applications, from simply pressure reduction to the depending effects such as degassing and dehydration or analysis of the partial pressures, to finish with the leak detection systems by mean of mass spectrometry.
Particular attention is therefore paid to the leaktest systems with tracing gas .
WHO IS IT FOR
• Process technologists,
• Product Industrialization managers,
• Operators and managers of Quality Control,
• Conductors of testing machines or devices,
• Maintenance technicians.
The course is aimed at those who approach new technologies, as well as those who already own process or testing equipments, or operate within technological contexts and wants to examine the issue in a practical and thorough way.
The course is given by experts in vacuum, certified in Non-Destructive Testing ( NDT) according to UNI-EN 473-2001
Location: Centro di Formazione della Lazzero Tecnologie Srl, Chieri (TO), Italia
Date: 19 - 20 November 2015
Registration deadline: 10 November 2015
DESCRIPTION
The introductory course is intended for those who approach vacuum and its most typical industrial applications, from simply pressure reduction to the depending effects such as degassing and dehydration or analysis of the partial pressures, to finish with the leak detection systems by mean of mass spectrometry.
Particular attention is therefore paid to the leaktest systems with tracing gas .
WHO IS IT FOR
• Process technologists,
• Product Industrialization managers,
• Operators and managers of Quality Control,
• Conductors of testing machines or devices,
• Maintenance technicians.
The course is aimed at those who approach new technologies, as well as those who already own process or testing equipments, or operate within technological contexts and wants to examine the issue in a practical and thorough way.
The course is given by experts in vacuum, certified in Non-Destructive Testing ( NDT) according to UNI-EN 473-2001